How to calibrate Ferrite in your metal detector? What is the right sample?
Ferrite calibration is a very important part of Metal Detector initial set up. This process is used for the setting of the VDI scale and teaching MD to avoid signals from the soil. There are different instructions over the internet, but many of them are misleading. The process is very simple and requires one minute of time. You will sometimes need a Finishing Pass, in case your Detector still hears the ferrite after calibration. In this case, you just need to manually tune the Ferrite Angle two degrees left or right. Your task is to make Detector silent to Ferrite. You will sometimes also need to invert the angle of the ferrite in case you are getting Double Signals from the coin. Just take the Auto Calibrated angle and rotate it 180 degrees. (eg if you have +45 than the angle will be -135 and vice versa )
Название:
How to calibrate Ferrite in your metal detector? What is the right sample?
Категория:
Хобби